Honda 25DK3LHGC Outboard Motor

Description

Honda Marine 25DK3LHGC
Three cylinder, 20″ long shaft, electric start, tiller steering, gas-assist tilt.Perfect for 14-16 ft. fishing boats, pontoon boats or small runabouts, the BF25 delivers big power and torque, thanks to its whopping 552 cc displacement. It has an ultra-smooth 3-cylinder design, the convenience and precision of up front tiller controls, a Fresh Water Flushport and Gas-assist Tilt.

Key Features

Four-Stroke Engine Design: World-renowned Honda quality, proven reliability with no oil mixing.
Over-Rev Protection: Standard rev-limiter protects the engine from severe damage caused by over-revving.
Over-Rev and Overheat Warning Systems: Standard over-rev and overheat warning systems offer peace of mind and protect your investment.
Fresh Water FlusHPort: Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required).
Shallow-Water Drive: Allows the engine to run in a tilted position at low-throttle settings – greatly reducing the risk of engine damage while navigating in shallow water.
Sacrificial Anodes: The BF25 has 1 internal and 2 external sacrificial anodes to protect metal components from corrosion.
Three-Year Warranty: The best outboards in the industry are backed by the best warranty in the business, 3 years parts and labour.
Forward-Mounted Shift Lever: Allows for easier shifting, especially when docking or in tight access areas.
Regulated, High-Output Charging System: A 4-amp charging system is standard on manual-start models, and a 10-amp on the electric-start models. Each system is equipped with a solid-state regulator/rectifier for easy hook-up.
Emergency Stop Switch/Safety Lanyard: The boat operator clips the lanyard to his or her wrist, which will activate the safety stop switch if the operator leaves the helm.
Standard Fuel Tank, Hose and Propeller: A 25-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment.

Engine

Type: 4-Stroke SOHC; 3 Cylinders, 6 Valves
Displacement: 33.7 cubic in. / 552 cc
Bore & Stroke: 24.0 x 2.48 in. (61 mm x 63 mm)
Full Throttle RPM Range: 5,000-6,000 RPM
Propshaft Rated Horsepower: 25 HP @ 5,500 RPM
Cooling System: Water Cooled
Fuel Delivery: 3 Carburetor
Recommended Fuel: Unleaded Gas. (Min. Pump Octane 86)
Ignition System: Capacitor Discharge; Digital CDI
Starting System: Electric
Exhaust: Through Prop Hub
Lubrication: Forced Lubrication
Recommended Oil: SAE 5W30 API service classification SJ or later
Oil Capacity: 1.80 Imp. qt (1.70 L) with oil filter repl.
Trim Range: -4° to +12°
Tilt Range: -4° to 64°

Drive

Gear Ratio: 2.08:1
Gear Shift: F-N-R

Equipment

Alternator: 10 amp / 126 watts
Gas Assisted Tilt: Standard
Oil Pressure Alert: Standard
Over Rev-Limiter: Standard
Temperature Alert: Standard

Dimensions

Overall Width: 14.8 in. / 375 mm
Transom Height: 21.7 in. / 552 mm

Propeller

Propeller Type: 3-Blade (Aluminum)
Propeller Diameter x Pitch: 9-1/4 x 12 in. / 235 mm x 305 mm

Dry Weight

LHGC-Type: 183 lbs. / 83.0 kg (With propeller mounted)

Warranty

Standard Warranty: As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use.
Honda Plus Extended Warranty: Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.

Related